Trim Kitchen Cabinets with Contemporary Crown Molding

Mar 12th

Contemporary crown molding – Trimming kitchen cabinets with contemporary crown molding adds an elegant, custom style to the kitchen. Mull making angles perfect is rarely a problem because the cabinets generally have quite square corners. The back side of a crown molding has two flat surfaces, which makes it possible to sit at an angle between a wall and ceiling. Installed on the cabinets, wall surface opposes the closet and attic apartment is not attached.

Top Contemporary Crown Molding
Top Contemporary Crown Molding

Loosen the adjustment screw on the square and set 90 degree square edge to 1/4-inch or the size of the crown cover the upper cabinet face. Install 1-by-2-inch popular timber on top of the cabinet, where the contemporary crown molding will be installed. Measure and cut wood to length and attach it to the top of the cabinet about 1/8-inch back from the cabinet face. Nail lumber for the cabinet top with finish nailed and 1 1/2-inch dive. Place a piece of crown molding on the miter table head with the flat wall at the back of the molding against the miter fence and the ceiling flat on the miter table. Measure along the side of the enclosure or series of enclosures from corner to corner.

12 Photos Gallery of: Trim Kitchen Cabinets with Contemporary Crown Molding

Image of: Top Contemporary Crown Molding
Image of: Simple Contemporary Crown Molding
Image of: Modern Contemporary Crown Molding
Image of: Contemporary Crown Molding Style
Image of: Contemporary Crown Molding Picture
Image of: Contemporary Crown Molding Photo
Image of: Contemporary Crown Molding Image
Image of: Contemporary Crown Molding Ideas
Image of: Contemporary Crown Molding Design
Image of: Best Contemporary Crown Molding
Image of: Best Contemporary Crown Molding Design
Image of: Awesome Contemporary Crown Molding for Kitchen
 

Keep the crown molding to the cabinet with the shortest edge down and against the cabinet face. Measure the left and right cabinet side from back to front. Set the saw table to 0 degrees. Place a piece of contemporary crown molding on miter table as before and cut off the left and right ends to make them square. Measure and mark from the right end to the left side of the cabinet. Hold the pieces against the cabinet and adjust the cut molding corners.