How To Install Pond Lights – Adding lighting in the water in ponds, pools and spa add beauty with the colors and reflections. But installing pond lights is a job for experts only. If not done properly, there may be the danger of electrocution. These light pools should only be installed on the base or on the walls of the pool. This is a very simple and can be done only by reading the instructions on the set task.
The first thing you have to do for installing pond lights is decide the size of the lights. It should be too big for the pond. There are some models that have their own weight and do not need any other system to stay at the base of the pond. Also, read the instructions for each game to see if there are special requirements. Most sets come disassembled, but the installation is very easy. If you bought a light that does not have any weight you should think of a way to anchor. A brick should be enough.
12 Photos Gallery of: How To Install Pond Lights
If when an installing pond light there’s a bomb in the pond, then you should be able to install a junction box that also the power supply for lighting. The junction box must be test of time. First we find the power line, and then turn off the power, cut the line. Trim about an inch of insulation from the two wires and connect to the terminals of the boxes. Exposing the two wires in the cable are the power supply for the transformer. Trim approximately a quarter inch cables and connect them to a pair of terminals in the junction box. The junction box and can be closed. Make sure the waterproof seal.