How to Install Black Crown Molding

Mar 9th

Black crown molding creates a beautiful framework for any mixture of antique pieces. Crown moldings are a decorative way to finish the decoration of a room and make a transition smooth between the wall and ceiling. Crown moldings have been used in all types of architectures for centuries and were ever so costly once only used in churches and homes of the wealthy. Crown molding is still expensive, but there is an alternative polystyrene product widely available that allows the average homeowner incorporate this style stylish inside your home. It is easily installed and does not require special skills to cut and place.

Black Crown Molding
Wonderful Black Crown Molding

The black crown molding is made of different materials such as wood and polystyrene. In this article we will refer to the installation of decorative moldings of polystyrene ceilings. After taking great measures, the moldings and transported to the necessary cut the ends at 45 ° angle pieces. This task can be performed easily using a metal blade and a miter box.

12 Photos Gallery of: How to Install Black Crown Molding

Image of: Wonderful Black Crown Molding
Image of: Perfect Black Crown Molding
Image of: Luxury Black Crown Molding
Image of: Contemporary Black Crown Molding
Image of: Black Crown Molding
Image of: Black Crown Molding Theater
Image of: Black Crown Molding Livingroom
Image of: Black Crown Molding Kitchen Cabinet
Image of: Black Crown Molding Ideas
Image of: Black Crown Molding Decor
Image of: Best Black Crown Molding
Image of: Beautiful Black Crown Molding
 

Then you apply the adhesive acrylic mounting on the rear face of the first black crown molding and the paste in position. To apply the adhesive use a glue gun. Repeating the above procedure, you continue pasting more moldings over the joint between the wall and ceiling, matching the edges. Once the acrylic adhesive has dried, put masking tape or masking tape to avoid staining the wall with paint. Then you proceed to paint the trim with acrylic paint. You stand latex gloves using a round brush and apply the enamel over the entire molding. Finally, it only remains to remove the tape and wait for the paint to dry.