Crown Molding Installation On Kitchen Cabinets – Crown is an attractive detail in every room, but what about the kitchen? Adding crown to the top of the kitchen cupboard is an inexpensive way to achieve a custom look in the kitchen.
Follow these steps crown molding installation on your kitchen cabinets. Cut 1 to 1 ½-inch strips of wood to fit on the top edge of the kitchen cabinets. Nail strips to the upper edge of the kitchen cabinets. This will serve as a nail punch for the crown, so you do not need to nail the finished surface of the cabinet. If you have access to an air nailer finished, it will do the job quickly and easily. If not, use a hammer and finishing nails.
12 Photos Gallery of: Crown Molding Installation On Kitchen Cabinets
Cut the crown to fit crown molding installation. Kitchen cabinets are usually carefully installed to be square, so you should be able to cut perfect 45-degree angles at the corners. Custom-angled cabinet installations will require more careful measurement. Nail cut crown to nailing on top of the cabinets. Once again, an air nailer finished does the job quickly and easily. Exit crown by filling nail holes and other imperfections with wood filler and painting or staining to match the cabinets. If you have purchased pre-finished crown, this step is not necessary.